Altigen IP 710 User Manual download pdf (Page 28)

20 IP 710 Manual

Registration from the Phone’s Menu

Under normal circumstances, the IP 710 phone registers itself

automatically. However, if registration failed for some reason (for

example, the server was not available), registration can be started again

from the IP 710 phone’s menu:

1. Press the Menu button.

2. Scroll to REGISTER.

3. Press the Enter button.

Configuring IP Settings

An IP address is a unique logical address that identifies each host computer

on a TCP/IP network. An IP address is a 32-bit number expressed as four

decimal numbers from 0 to 255, separated by periods.

Use these guidelines when manually configuring the IP settings:

• Ensure the default gateway IP address is on the same subnet as the host

IP address. Check with your system administrator.

• When inputting IP addresses into the IP 710, use the * key to enter

periods. For example, 209.120.12.8 would be input as 209*120*12*8.

Assigning a Local IP Address

To assign an IP address, use the following steps:

Enable

GateKeeper

Network >

Enable GK

Sets whether GateKeeper is enabled

or disabled.

GateKeeper

Discovery

Network >

GK Discovery

Sets whether GateKeeper discovery is

enabled. IP phone will automatically

find GateKeeper. Shows only if

GateKeeper is enabled.

Enable NAT

Network >

Enable NAT

Sets whether NAT is enabled or

disabled.

NAT Address

Network >

NAT Address

Sets the NAT server’s public IP

address.

Setting Menu Path Description

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 55 56

Comments to this Manuals

No comments

Altigen IP 710 User Manual Page 28

Comments to this Manuals

Related products and manuals for IP phones Altigen IP 710