Altigen IP 805 User Manual download pdf (Page 18)

System Settings

14 IP 805 User Manual

System Settings

Network Settings

Setting Menu Path Description

MaxCS

Server

address

System > Server IP Sets the MaxCS server’s IP address.

Trunk Access

Code

System >

Trk Access Code

Sets the digit required to enable a user to return

an outside call from the Call Log.

Hour Offset System > Hour Offset

Sets the time offset from the MaxCS server’s

time.

TFTP Server System > TFTP Server

Sets the TFTP server IP address for updating

firmware.

Boot

Download

System > Boot Download

After a firmware upgrade, this setting changes

to No. This is used mainly for upgrading or

troubleshooting. On the next boot, the IP phone

will download the new firmware from the TFTP

server, if this is set to Yes.

Emergency

Number

System > Emergency Num

Sets the IP phone’s emergency number. For

the U.S., the emergency number is 911.

Emergency

Gateway

System > Emergency GW

Sets the IP phone’s emergency gateway IP

address

SIP Register System > Enable SIP Registration

Enables SIP registration to the emergency

gateway

Auto-discover System > Auto Discover

Enables automatic discovery of the server IP

address via DHCP option 120

E911 LID System > E911 LID Sets the IP phone’s E911 Location ID

Version

Information

System > Version Info [Read only] Displays the version number of the IP phone.

Setting Menu Path Description

Enable DHCP Network > Enable DHCP

Sets whether Dynamic Host Configuration

Protocol (DHCP) is being used by the IP phone

to retrieve a new IP address upon boot up.

Local Address Network > Local Address

Sets the IP phone’s local address; shows only if

DHCP is disabled.

Network Mask Network > Network Mask

Sets the IP phone’s network mask; shows only

if DHCP is disabled.

Gateway Network > Gateway Sets the default Gateway IP address.

NAT Address Network > NAT Address Sets the NAT server’s public IP address.

Enable Vlan Network > VLan

Enables or disables VLAN usage.

Note: When you change this setting, the phone

will automatically reboot after you close the

menus.

Enable 802.1q Network > Enable 802.1q Define the 802.1q VLAN ID.

Enable 802.1p Network > Enable 802.1p Define the 802.1p prioritization value.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Comments to this Manuals

No comments

Altigen IP 805 User Manual Page 18

Comments to this Manuals