Altigen 720 User Manual download pdf (Page 23)

IP 720 User Manual 15

If the phone successfully passes through these stages, the

phone

shows the date, time, and extension in the LCD screen and is now in

normal operating mode.

01/12 04:16PM x300

If it doesn’t pass through these stages successfully, refer to

“Troubleshooting” on page 36.

Miscellaneous Operation Notes

• Logging in and out—When using #26 and #27 to log out / log in, the

IP 720 must be onhook. Pressing the Speaker button and then using

#26 or #27 will not work.

• BASIC mode—

If the IP 720 phone fails to register with MAXCS

during startup, the phone operates in Basic mode. When in Basic

mode, the IP phone’s LCD display shows (BASIC) IDLE.

No MAXCS switching features are availab

le in this operating mode.

However, the phone user can enter a destination IP address followed

by #, and make an outgoing call through the IP network to reach

MAXCS or another IP 720 phone. Also, the IP phone can accept

incoming calls originating from MAXCS or another IP 720 phone.

If the IP phone’s local configuration

is changed while in BASIC

mode, the changes are overridden by MaxAdministrator settings.

• Incoming call t

akes priority—If a call comes in while you are using

any phone menu or display (such as workgroup display or Call Log),

the phone will exit the menu and go to the ring state.

• Restoring default

settings—To automatically restore the original

default settings for the IP 720 phone:

1. Press the Menu but

ton.

2. Press * * 2,

then press the Enter button.

• Reboo

ting the phone—To reboot the IP 720 phone, press * * 3, then

press the Enter button.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

No comments

Altigen 720 User Manual Page 23